Answers
Nov 13, 2017 - 03:05 AM
This winterizing bypass plate should work with all standard 10" and 5" housings.
May 30, 2020 - 06:43 AM
I know this question was asked 3 years ago but others might benefit from an ACTUAL answer.
NO!! The bypass plate does not fit the RCS housing. I know cause I just tried it!! :(
The RCS housing has a fitting inside the cap that protrudes downward. It fits inside the center hole of the filter. With the plate installed, the housing cannot screw into the cap.
The term "standard" is mis-leading. The plate is designed to fit the more COMMON housings with the threads on the INSIDE and screw OVER the cap.
The RCS housing has its threads on the OUTSIDE and screws INTO the cap.
Hope this helps others.
NO!! The bypass plate does not fit the RCS housing. I know cause I just tried it!! :(
The RCS housing has a fitting inside the cap that protrudes downward. It fits inside the center hole of the filter. With the plate installed, the housing cannot screw into the cap.
The term "standard" is mis-leading. The plate is designed to fit the more COMMON housings with the threads on the INSIDE and screw OVER the cap.
The RCS housing has its threads on the OUTSIDE and screws INTO the cap.
Hope this helps others.
By
I know the question was three years ago but for others reading this....NO!...the bypass plate does NOT work with WaterPur RCS housings. I know cause I just tried it!!!
Inside the RCS cap there is a fitting designed to go inside the center hole of the filter. This protrudes downward and with the plate installed the housing cannot screw into the cap.
The term standard is mis-leading. This plate is designed for the more COMMON housings where the threads are in the INSIDE of the housing and screw OVER the cap.
The RCS housing has its threads on the OUTSIDE and screws INTO the cap.
Add New Comment